Frühzeitig gewarnt

Warnt sofort bei Druckverlust oder kritischer Reifentemperatur – bevor daraus ein Sicherheitsrisiko wird.

Druck & Temperatur live

Alle Werte live in der RideLink App sowie auf Apple CarPlay und Android Auto.

In 2 Minuten montiert

Sensoren aufschrauben, koppeln und direkt losfahren – ganz ohne Werkstatt.

Kein Abo

Einmal kaufen, dauerhaft nutzen – mit wechselbarer Batterie und passend für nahezu jedes Motorrad.

Puncture detection

Always ride safely with the correct tire pressure, save time on manual checks and reliably detect punctures.

Installed in 2 minutes

Ultra-fast installation on any motorcycle tire with a Schrader valve. Angled valves are also supported. No balancing and no tire change required.

Real-time measurement

Measure directly on your smartphone in real time. Readings are available either in the app or through offline-capable widgets.

Track-ready

Check the pressure before and after every session and adjust it precisely to your needs. No more manual measurements with a pressure gauge.

One TireGuard. Countless possibilities.

Whether it is a car, motorhome, bicycle or trailer, TireGuard fits any Schrader valve and reliably measures tire pressure and temperature.

Sensor & Montage

Produkttyp
Bluetooth-Reifendruckkontrollsystem
Sensortyp
Externe Ventilsensoren
Montage
Direkt auf das Reifenventil aufschrauben
Montagezeit
Circa 2 Minuten
Ventiltyp
Autoventil, auch für Eckventile geeignet
Abmessungen
20,2 × 13,8 mm
Gewicht
7,6 g je Sensor inklusive Batterie
Schutzklasse
IP57
Auswuchten
Nicht erforderlich
Batterie
Wechselbare Knopfzelle CR1632
Batterielaufzeit
Circa 2 Jahre*

Messung & Konnektivität

Messwerte
Reifendruck, Reifentemperatur und Batteriestatus
Messbereich
1,0 bis 9,0 bar
Messgenauigkeit
±0,05 bar
Betriebstemperatur
Sensor: −40 °C bis +85 °C
Mit handelsüblicher CR1632: −20 °C bis +60 °C
Datenübertragung
Bluetooth Low Energy
Übertragungsintervall
Alle 30 Sekunden oder bei Veränderung
Anzeige
RideLink App für iOS und Android
Smartphone-Widget
Reifendruck direkt auf dem Homescreen
Fahrzeugdisplay
Apple CarPlay und Android Auto
Warnfunktionen
Warnung bei Druckverlust und kritischer Temperatur
Monatliche Kosten
Keine

* Die tatsächliche Batterielaufzeit hängt unter anderem von der Nutzung, der Anzahl der Übertragungen und der Umgebungstemperatur ab.

Compact. Lightweight. Discreet.

Measuring just 20 × 14 mm and weighing 8 g, TireGuard sensors fit almost any vehicle with a Schrader valve and do not require wheel balancing.

Installed in 2 minutes

Load video:

At a glance

With TireGuard, you can immediately see whether your tire pressure is correct, whether maintenance is due and whether your bike is being monitored safely. No uncertainty before your next ride and no unnecessary checks along the way — simply more control, greater safety and added confidence every time you set off.

Know your tire pressure. Do not guess.

With TireGuard, the app shows the current pressure, temperature, sensor battery status and recommended target pressure for each tire. You can immediately spot any deviation and respond before low pressure becomes a safety risk, causes unstable handling or leads to unnecessary tire wear. Warnings are clearly highlighted, so you can see at a glance where action is needed.

Tire pressure directly on your home screen.

The TireGuard widget shows your tires’ key readings without having to open the app. A quick glance is all it takes to check the current pressure and last update — ideal before setting off, during a journey or after the vehicle has been parked for some time. It makes everyday checks simpler, faster and more intuitive. And, of course, it all works offline.

FAQs

Does TireGuard fit every vehicle?

TireGuard sensors are universal tire pressure sensors and fit any Schrader valve on motorcycles, cars, trailers and motorhomes. Clearance must be checked before use.

Why do I need a TPMS on my motorcycle?

Because incorrect tire pressure is one of the most commonly underestimated factors affecting safety and performance. Even small deviations influence handling, cornering stability, braking distance and tire wear. TireGuard shows pressure and temperature live, allowing you to identify problems immediately rather than only when they become critical.

What advantage does TireGuard offer over checking at a petrol station?

TireGuard monitors continuously — not only before you set off. Pressure and temperature can change while you ride, for example because of a slow puncture, rising temperature or a leak. A petrol-station check cannot show you these changes in real time.

Why is TireGuard particularly useful on tours?

Because you can tell immediately if something is wrong while you are on the road. On long journeys, in the mountains or on holiday, you do not want to wonder why the motorcycle suddenly feels different. TireGuard gives you immediate clarity and helps you respond early, before a small problem becomes a major one.

Can TireGuard also save me money?

Yes. Correct tire pressure protects your tires and reduces unnecessary wear. Riding permanently with incorrect pressure wears tires out faster and reduces performance. TireGuard helps you get the most from your tires and avoid expensive consequential damage or premature replacement.

Why choose TireGuard rather than another TPMS?

Because TireGuard was designed specifically for motorcyclists and integrates perfectly into the RideLink ecosystem. You get more than measurements: a smart system for greater safety, better control and added confidence on every ride. Easy to install, straightforward to understand and helpful exactly when it matters.